Info
- Passive 2-way floor monitor, 12"/1.4" neodymium coax
- Smallest and lightest floor monitor in the 12" size class
- Rounded low-profile housing for elegant and unobtrusive stage use
- High-gain before feedback
- Stable and step-proof 2mm steel grille
- Can be carried with just one hand
- Recessed and downward tilted connector panel
- Click-in flyware for tool-free flight mechanics and securing point
The Voice-Acoustic CXN-12 is a high-performance, passive 2-way stage monitor, equipped with a coaxial 12"/1.4" neodymium transducer with 80° conical dispersion. With its compact and elegantly rounded low-profile enclosure, the CXN is ideal for live performance as well as for demanding applications in TV and gala productions. Thanks to its small footprint, it takes up very little space on stage.
The high sound quality and neutral balance guarantee first-class transparency, assertiveness and feedback resistance. Performers or musicians receive precise feedback with clean intonation. A powerful, warm and precise fundamental sound and distortion-free high frequencies create a sense of well-being on stage for tireless performance. The CXN-12 responds very well to EQ interventions, allowing a sound engineer to easily emphasise voices and instruments in the individual monitor mix.
With a width of just 37 cm and a height of only 30 cm, the CXN-12 is one of the smallest floor monitors in the 12" class. With a weight of just 14 kg, it is the lightest in its class. Thanks to its low weight and the central handle in the base of the housing, the speaker can also be carried comfortably with one hand. The handles on the sides, embedded in the centre of gravity, increase ergonomics in daily touring use. The honeycomb grille has a wide lateral support surface with a stabilising curvature and 2 mm material thickness, making it step-resistant.
The connection panel is recessed and angled downwards. Speaker plugs can't be kicked off and are visually unobtrusive, rain drips off the edge of the housing and the connections are protected. The large bass reflex ports of the CXN-12 are not located in the baffle, but on an angled side, parallel to the floor and facing the stage. This design increases efficiency and prevents rain from running over the baffle into the interior of the enclosure.
The rubber feet of the CXN-12 fit into the stacking holes of an upright Paveosub-115 and are ideal for monitoring a drummer sitting on a drum riser. A safety point for a safety rope and a recessed flying track for the popular Easyfly-mechanism, as well as an optional U-bracket, allow a wide range of multipurpose applications.
As with all Voice-Acoustic loudspeakers, the housing is made of sturdy birch plywood of the highest quality: CNC milled, grooved, screwed and waterproof glued. The surface is protected by a stable and moisture-resistant polyurea coating in black. A white version and special colours with 2K textured paint are optionally available.
Control
The CXN-12 is a passive bass reflex loudspeaker with an impedance of 8 Ω. The internal passive crossover only separates the frequency range. The linearization is done by DSP filters. Operation only with a single channel of a Voice-Acoustic HDSP system amplifier, abou a self-powered subwoofer or the VADAS system amplifier!
Technical Data
Drivers
12"/1,4" Neodym Coaxial Chassis, 12" woofer with 3" voice coil, 1,4" compression driver with 2,4" voice coil
Frequency range
63 Hz - 18 kHz (- 10 dB)
100 Hz - 15 kHz (+/- 3 dB)
Coverage range (h x v)
80° x 80° as Monitor
Impedance
8 Ω
Powerhandling (AES / Program / Peak)
400 W / 800 W / 1.600 W
Sensitivity 1 W/1 m
101 dB SPL
Sound pressure at (AES / Program / Peak)
127 dB SPL / 130 dB SPL / 133 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 1+/1- (4-pole looped-through)
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
307 (H) x 370 (W) x 477 mm (D) / 14 kg
Accessoires
Transport cover for CXN-12
Item no. 500122000
Transport cover for the CXN-12 stage monitor, stable Codura fabric with padding, all handles are cut out.
Heavy-Duty Flightcase for CXN-12
Item no. 500123001
Heavy-duty flight case for up to two CXN-12 with partition wall. 4 blue wheels, 4 large butterflys, 8 large folding handles. 9 mm Wood with black scratch-resistant surface. Stable 35 x 35 mm edge profile 2.5 mm thick, 5 mm outside radius. Dimensions optimised for truck size.
Wall bracket für CXN-12
Item no. 400123001-9005
Stable wall bracket for mounting CXN-12 flat on the wall. 2 x M10 hexagon head screws included in delivery.
U-bracket for CXN-12
Item no. 400122001-9005
Stable swivel bracket for installation on a high stand, truss or ceiling. 2 x M10 hexagon head screws included in delivery.
Hand lever M10 x 30 mm
Item no. 600781030
Hand lever M10 x 30 mm, adjustable, flat design, steel black burnished with plastic lever, suitable for all U- and C-brackets.
Flat knurled screw M10 x 25 mm
Item no. 999910251
Flat knurled screw M10 x 25 mm, steel black burnished for all u- and c-brackets. As an alternative to the hexagonal bolts supplied with the brackets.
Tripod flange with female M10 thread connection
Item no. 999924528
Tripod flange with female M10 thread connection for mounting on the U-bracket of the CXN-12. Delivery without M10 screw.
Easyfly-mechanics
Item no. 409991001
Tool-free flight-mechanics for clicking and exact alignment of the speaker in the horizontal and vertical axis. Removable recording for example the self-lock clamp included.
Carrying bag for Easyfly-Mechanics
Item no. 409992000
Carrying bag for up to two Easyfly-Mechanics with attached truss clamp plus accessory compartment for e.g. two safetys with single studs.
Self-lock clamp
Item no. 999950731
Loudspeakers can be flown by one person with the self-lock clamp. The clamp hooks directly into the truss and can be easily tightened. Load capacity 250 kg.
Single stud
Item no. 999957450
Single stud for securing a loudspeaker with safety cable.
Safety 6/1000
Item no. 999963100
1 m safety cable 6 mm Ø for securing a suspended loudspeaker. One side with a screwable quick connect.
Universal suspension device for flight mechanics
Item no. 409992001
For suspending speakers from very high ceilings or trusses. Prevents speakers from twisting due to two parallel steel cables or chains and allows horizontal alignment due to central pivot axis. Suitable for Easyfly mechanics, LA-Stick flying mechanics, Ikarray-8 flying mechanics and all U- and C-brackets. Delivery without further mounting accessories.
Multifunctional rotating ceiling bracket
Item no. 409998001
For hanging speakers from ceilings using steel cables or chains and various accessories. Horizontal alignment due to central pivot axis. Max. load: 60 kg. Available in white and black. Supplied without further mounting accessories.
Speaker stand crank
Item no. 999921300
Stable stand for cranking with double protection against falling. Height: 139 to 218 cm. Max. load capacity: 50 kg.
Speaker stand
Item no. 999921467
Stable stand with expanding mandrel system which provides a tight and firm fit for the speaker. Double protection against falling. Height: 132 - 220 cm. Max. load capacity: 50 kg.
Distance rod with crank
Item no. 999921340
Distance rod for cranking with expanding mandrel system which provides a tight and firm fit for the speaker. Height: 92 - 152 cm. Max. load capacity: 50 kg.
Telescopic rod
Item no. 999921368
Telescopic rod with expanding mandrel system for play-free seating in the tripod base. Height: 110 to 180 cm. Max. load capacity: 35 kg.
Iron base with weight plate
Item no. 999912311
The set includes a flat 10 kg iron base Ø 45 and a 5 kg weight disc. It is suitable distance rods with an M20 screw thread. The weight disc can be mounted tool-free.
Carrying bag for round base Ø 45 cm
Item no. 999912399
Padded bag made of robust, water-repellent nylon, with space for a round base Ø 45 cm with weight disc. The bag has two carrying straps with a soft velcro handle, a sturdy zipper and a transparent window for labels.
Iron base
Item no. 999926705
The iron base 55 x 55 cm has a carrying handle and a cable bushing. The base is suitable distance rods with an M20 screw thread. Weight: 13,5 kg.
Carrying bag for iron base
Item no. 999933100
Padded bag made of robust, water-repellent nylon, with space for a iron base 55 x 55 cm. The bag has a padded handle and a stable zipper.
Carrying bag for 2 x speaker stand/ rod
Item no. 999920000
Carrying bag for two speaker stands or distance rods, also with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.
Cable Clip for speaker stand/ rod
Item no. 999935000
The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.
speakON cable 0.5/1/3/6/10/15/20/30 m
Item no. 80440XXX1
Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.
speakON adapter
Item no. 999654669
Adapter to connect two speaker cables.