Info

The HDSP-12 is a 12-channel DSP amplifier with quad technology and has an output power of 16.000 W into 4 Ω.

The Voice-Acoustic HDSP amplifier series has been developed with the most demanding requirements in audio quality and reliability in mind. With the high number of output channels, for the first time, it has become possible to separately filter bi and tri amping with the HDSP series cost effectively. The intelligent wide-range switching power supply automatically detects the AC input values making it possible to use anywhere in the world.

The integrated loudspeaker management systems (DSP – digital signaling processor) work with a 64 bit/96 kHz sampling rate in audiophile sound quality. Premium converters offer a 120 db dynamic range and can process an input level of up to + 23 dBu. This amplifier series is specked out with the factory settings for the speakers, limiter and time alignment for the output channels. Additionally each input channel boasts 10 parametric filters (Bell, High Shelf, Low Shelf, Notch, Allpass), compressors, flexible routing, phase settings, a lengthy delay section for delays up to 275 meters, and an input limiter. The series is also equipped with enough memory to add your own presets for the use of loudspeakers from other manufacturers. The amplifiers are likewise available without Voice-Acoustic factory presets.

The LCD display on the front side enables all functions to be manually accessed from a digital rotary encoder and buttons. Our Voice-Acoustic’s VA-WLAN remote software for PC or Mac offers even more convenient access to these controls. This software makes it possible to link, remotely operate and monitor up to 128 individual HDSP amplifier units or self-powered loudspeakers in one common network. Linking is accomplished fully automatically via IP-address. The connection operates bi-directionally in real-time and provides a diverse scope of system feedback (headroom, temperature, and impedance measurement).

One major advantage of Voice-Acoustic power amplifiers is their modular capability. Multiples of highly effective state-of-the-art Class-D modules are fitted with separate power supplies and separate DSP boards to endure redundancy and guarantee supreme operational safety. This easy-to-service modular style allows for simple and fast exchange of components by any electrical assistant in a short time.

Compared to conventional multi-channel power amplifiers, which have to be powered with one power supply, the HDSP amplifier’s modular capabilities guarantee maximum performance and lots of headroom – even in a deep base range without simultaneously influencing other channels.

The electronics have been mounted upside-down in the super sturdy 19" aluminum housing. Any dust particles will float to the floor of the box and not lay down on the platinum.

Voice-Acoustic Remote-Network
Voice-Acoustic Remote-Network

Technical Data

Quantity channel
12 Channel, class-D latest generation

Power
16.000 W (4 x 2.400 W + 8 x 800 W) at 4 Ω
3.160 W (2 x 1.580 W + 8 x 450 W) at 8 Ω
1.600 W (2 x 800 W + 8 x 200 W) at 16 Ω

Quad technology
4-fold construction for maximum operational safety
High, load-stable bass performance through individual power supplies

Powerconnector
2 x 16 A powerCON IN

Software Interfaces
Additional rear DSP-LAN socket for wired network in fixed installations

Signal connection analog
8 x XLR female/male

Signal connection digital
4 x XLR female/male

Speaker connections
8 x speakON sockets, 4 pole assignment

Preset locations
4 x 80 preset locations, including 2 different presets assignable simultaneously

Manual hand operation
Menu navigation by means of buttons and digital rotary encoders, function lockable

Display
4 x LED display
4 x LCD display with software dimmable and switchable

Body housing
19"/3HE, 430 mm deep, strong black colored aluminum housing

Weight
16 kg

Integrated 3CH Amplifier Modul

Amplifier
3rd Generation Class D

Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω

Power output CH2 & CH3
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω

Amplifier gain
LF: 32 db, HF: 26 db

Signal-to-noise ratio
>120 db (20 - 20.000 Hz, 8 Ω)

Damping factor
>1.000 (8 Ω, 1 kHz)

Distortion
THD+N < 0,05 % (20 - 20.000 Hz, 8 Ω)

Protection
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over voltage protection
DC protection of outputs
Input limiter, peak limiter
Temperature monitoring of the heatsink and transistors

Voltage
Intelligent and regulated switching power supply with automatic voltage detection
Switching between 120/230 V 50/60 Hz, worldwide use
Voltage range: from 85 - 268 V

Integrated DSP Loudspeaker Management System

Prozessor
64 bit, 96 kHz sample rate

Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-Amplifiers in one network

Dynamic range input
120 db

Input level Nominal / Maximal
+ 6 dBu / + 23 db

Latency
0 - max. 0,5 ms

Routing
2 input mixers allow flexible routing to each output

EQ Filter
20 parametric EQ filters per path
each filter can be set as Bell, Shelving, Notch, or Allpass Filter

X-Over
Butterworth, Bessel, Linkwitz-Riley

Limiter
Per input and output

Delay
0 up to 800 ms (max. 275 m delay) in each input for the user
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

Phase
Infinitely adjustable from 0° - 180°

Operable language
English, German, France, Spain

Software interfaces
Software update via Ethernet

Software

Realtime monitoring for PC and MAC
Impedance measurement -monitoring of the connected drivers per output stage channel
Temperaturmessung der EndstufensektionTemperature measurement of the power amplifier section
Gruppenbildung zum gleichzeitigen Einstellen aller zusammengefassten LautsprechertypenGroup building for simultaneous setting of all combined speaker types
Dimmung und Abschaltung des DisplaysDimming and switching off the display
Standby-Schaltung des EndstufenmodulsStandby circuit of the power amplifier module
Passwortschutz mit Abstufung: Werkseinstellung / User-Ebene / KomplettschutzPassword protection with gradation: Factory setting / user level / complete protection

Downloads

Accessoires

PD-32-6 V2 TRUE1

Item no. 999492020

19"/3 HE intelligent 32A power distributor, suitable for applications in temporary and permanent installations. 32 A CEE Input, 6 x Schuko Output in parallel 6 x Neutrik powerCON TRUE1 Output, 1 x 16 A CEE, 6 x independent circuits (RCBO) and precise multi meter.

PD-32-6 V2 powerCON

Item no. 999492010

19"/3 HE intelligent 32A power distributor, suitable for applications in temporary and permanent installations. 32 A CEE Input, 6 x Schuko Output in parallel 6 x Neutrik powerCON Output, 1 x 16 A CEE, 6 x independent circuits (RCBO) and precise multi meter.

PD-32-6 V2 Multipin

Item no. 999492030

19"/3 HE intelligent 32A power distributor, suitable for applications in temporary and permanent installations. 32 A CEE Input, 6 x Schuko and 1 x Multipin ILME 16 pol. Output, 1 x 16 A CEE, 6 x independent circuits (RCBO) and precise multi meter.

Bagax product catalogue

Download product catalogue 2023 (English version)

BAGAX 2HE/19" SDS Stack-Rack

Item no. 9B1910002

SDS Stack-Rack (Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 156 x 600 x 600 mm.

BAGAX 3HE/19" SDS Stack-Rack

Item no. 9B1910003

SDS Stack-Rack (Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 201 x 600 x 600 mm.

BAGAX 4HE/19" SDS Stack-Rack

Item no. 9B1910004

SDS Stack-Rack (Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 225 x 600 x 600 mm.

BAGAX 6HE/19" SDS Stack-Rack

Item no. 9B1910006

SDS Stack-Rack (Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 336 x 600 x 600 mm.

BAGAX 2HE/19"/ED SDS Stack-Rack

Item no. 9B1920002

ED SDS Stack-Rack (Extra Deep Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 156 x 600 x 780 mm.

BAGAX 4HE/19"/ED SDS Stack-Rack

Item no. 9B1920004

ED SDS Stack-Rack (Extra Deep Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 225 x 600 x 780 mm.

BAGAX 6HE/19"/ED SDS Stack-Rack

Item no. 9B1920006

ED SDS Stack-Rack (Extra Deep Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 336 x 600 x 780 mm.

BAGAX Wheelboard for ED SDS & SDS Stack-Racks

Item no. 9B1940000

Wheelboard for ED SDS and SDS stack rack system. With stacking trays and locking system. 4 x blue wheels (two with brakes). Load capacity 450 kg.

Schuko V6 3/6/10/15/20 m

Item no. 80325XXX4

Schuko 6-fold junction with Titanex H07RN-F 3 x 2,5 sq mm cable in various lengths. The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

XLR signal cable 0,5/3/6/10/15/20/30/50 m

Item no. 80205XXX5

XLR signal cable in different lengths with Neutrik connectors NC3FXX-B and B-NC3MXX, black housing and gold-plated contacts. Large wire diameter of 2 x 0,5 sq mm with 28 x 0.15 sq mm copper per core, 100 % shielding due to dense copper spiral turner and metallised fleece.

powerCON TRUE1-TOP 3/6/10/15/20/30/50 m

Item no. 80325XXX3

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W-TOP and NAC3MX-W-TOP device connectors.

powerCON TRUE1-TOP-Schuko 3/6/10/15/20/30/50 m

Item no. 80325XXX2

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W-TOP and Schuko device connectors.