Info

  • 1 x 15" compact self powered bass reflex subwoofer
  • 3-channel 4 kW ampmodul: 1 x 2.400 W + 2 x 800 W at 4 Ω
  • Horizontally and vertically stackable
  • Bi-amping function
  • Manual control via display, push-button and encoder
  • Software control via Dante (Digital Audio Network Through Ethernet)
  • 120 internal Presets
  • World's flattest 15" bass with only 36 cm height
  • 1 x 6 m Schuko/powerCON TRUE1-TOP cable

The Paveosub-115sp DDA is a very compact self-powered bass reflex subwoofer with 3-channel 4 kW power amplifier module and DSP speaker management system.

With its low profile of only 36 cm and a width and depth of only 54 x 57 cm, the bass is ideal for fixed installations where a discreet appearance is required and the loudspeakers need to be integrated into the architecture as unobtrusively as possible.

In mobile use, the Paveosub-115sp DDA saves a lot of space and weight with a transport volume of only 110 litres. The two large handles can take hold from all sides and are located at the centre of gravity.

A removable and stackable front wheel board is available as an accessory for easy handling of the subwoofer. The optional transport protective cover also can be used as weather protection at outdoor events.

The Paveosub-115sp DDA is equipped with a newly developed neodymium transducer with 4" voice coil that can handle 1.200 W AES. The magnet system has three demodulation rings for particularly low distortion. Massive cooling fins ensure low power compression at maximum performance. Together with a high linear excursion and a low moving mass, the subwoofer offers deep, powerful and at the same time very precise bass reproduction.

Internal bracing ensures maximum stability and prevents unwanted cabinet resonances.

The subwoofer can be used flat or upright. On two sides there are stacking moulds, rubber feet and M20 flanges for flexible use with an attractive appearance, depending on the combined satellite loudspeakers. Standing upright, the Paveosub forms a very slim silhouette.

The stacking moulds on the top of the sub are in the same foodprint as the CXN-16 stage monitor.

In addition, both loudspeakers have a width of 54 cm and thus form an elegant optical unit and are a professional set for drum or DJ monitoring, for example. A self-powered Paveosub-115sp DDA can power a CXN-16 bi-amping in half-powered mode.

The active electronics are convection cooled by a large heatsink and are maintenance free. No dust or moisture can be sucked or drawn in, making the Paveosub-115sp DDA ideal for permanent installations. The robust cooling fins are amply rounded and have no sharp edges.

The control unit, DSP unit, signal connections and the Speakon OUT terminal are protected against moisture with a weather-proof, transparent cover. The cooling system is waterproof and the powerCON TRUE1 connectors are equipped with a rubber sealing cap.

Control

The woofer is in 8 Ω. The 15"chassis of the Paveosub-115sp DDA is powered by one channel (1.580 W/8 Ω) of the internal power amplifier module. 2 x 800 W/4 Ω are available for satellite or monitors.

A Paveosub-115sp DDA can power a second Paveosub-115 and power up to 4 additional speakers.

Paveosub-115 via Paveosub-115sp
Paveosub-115 via Paveosub-115sp

Technical Data

Drivers
1 x 15" Neodym long excursion woofer with 4" voice coil

Lower cut-off frequency
34 Hz (- 10 dB)
45 Hz (- 3 dB)

Impedance
8 Ω active separated

Powerhandling (AES / Program / Peak)
1.200 W / 2.400 W / 4.800 W

Sensitivity 1 W/1 m
98 dB SPL (half space)

Sound pressure at (AES / Program / Peak)
129 dB SPL / 132 dB SPL / 135 dB SPL

Connection
2 x NEUTRIK NL4 IN/OUT 2+/-

Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint

Dimensions / Weight
360 (H) x 540 (W) x 570 mm (D) / 30,4 kg

Integrated 3CH Amplifier Modul

Amplifier
3rd Generation Class D

Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω

Power output CH2 & CH3
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω

Amplifier gain
LF: 32 db, HF: 26 db

Signal-to-noise ratio
>120 db (20 - 20.000 Hz, 8 Ω)

Damping factor
>1.000 (8 Ω, 1 kHz)

Distortion
THD+N < 0,05 % (20 - 20.000 Hz, 8 Ω)

Protection
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over voltage protection
DC protection of outputs
Input limiter, peak limiter
Temperature monitoring of the heatsink and transistors

Voltage
Intelligent and regulated switching power supply with automatic voltage detection
Switching between 120/230 V 50/60 Hz, worldwide use
Voltage range: from 85 - 268 V

Integrated DSP Loudspeaker Management System

Prozessor
64 bit, 96 kHz sample rate

Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-Amplifiers in one network

Dynamic range input
120 db

Input level Nominal / Maximal
+ 6 dBu / + 23 db

Latency
0 - max. 0,5 ms

Routing
2 input mixers allow flexible routing to each output

EQ Filter
20 parametric EQ filters per path
each filter can be set as Bell, Shelving, Notch, or Allpass Filter

X-Over
Butterworth, Bessel, Linkwitz-Riley

Limiter
Per input and output

Delay
0 up to 800 ms (max. 275 m delay) in each input for the user
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

Phase
Infinitely adjustable from 0° - 180°

Operable language
English, German, France, Spain

Software interfaces
Software update via Ethernet

Software

Realtime monitoring for PC and MAC
Impedance measurement -monitoring of the connected drivers per output stage channel
Temperaturmessung der EndstufensektionTemperature measurement of the power amplifier section
Gruppenbildung zum gleichzeitigen Einstellen aller zusammengefassten LautsprechertypenGroup building for simultaneous setting of all combined speaker types
Dimmung und Abschaltung des DisplaysDimming and switching off the display
Standby-Schaltung des EndstufenmodulsStandby circuit of the power amplifier module
Passwortschutz mit Abstufung: Werkseinstellung / User-Ebene / KomplettschutzPassword protection with gradation: Factory setting / user level / complete protection

Accessoires

Transport cover Paveosub-115

Transport cover for Paveosub-115/115sp, stable Cordura fabric with padding, all handles and connections are cut.

Detachable wheelboard Paveosub-115

Detachable wheelboard to mount on Paveosub-115/115sp, 15 mm wood with polyurea coating, stackable, 2 butterfly locks, 2 handles, 4 blue wheels, engraved logo.

Distance rod with crank

Item no. 999921340

Distance rod for cranking with expanding mandrel system which provides a tight and firm fit for the speaker. Height: 92 - 152 cm. Max. load capacity: 50 kg.

Telescopic rod

Item no. 999921368

Telescopic rod with expanding mandrel system for play-free seating in the tripod base. Height: 110 to 180 cm. Max. load capacity: 35 kg.

Carrying bag for 2 x speaker stand/ rod

Item no. 999920000

Carrying bag for two speaker stands or distance rods, also with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.

Cable Clip for speaker stand/ rod

Item no. 999935000

The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.

speakON cable 0.5/1/3/6/10/15/20/30 m

Item no. 80440XXX1

Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

speakON adapter

Item no. 999654669

Adapter to connect two speaker cables.

XLR signal cable 0,5/3/6/10/15/20/30/50 m

Item no. 80205XXX5

XLR signal cable in different lengths with Neutrik connectors NC3FXX-B and B-NC3MXX, black housing and gold-plated contacts. Large wire diameter of 2 x 0,5 sq mm with 28 x 0.15 sq mm copper per core, 100 % shielding due to dense copper spiral turner and metallised fleece.

powerCON TRUE1-TOP 3/6/10/15/20/30/50 m

Item no. 80325XXX3

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W-TOP and NAC3MX-W-TOP device connectors.

powerCON TRUE1-TOP-Schuko 3/6/10/15/20/30/50 m

Item no. 80325XXX2

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W-TOP and Schuko device connectors.