Info
- 1 x 12" compact self powered bass reflex subwoofer
- 3-channel 4 kW ampmodul: 1 x 2.400 W + 2 x 800 W at 4 Ω
- Horizontally and vertically stackable
- Bi-amping function
- Manual control via display, push-button and encoder
- Software control via Dante (Digital Audio Network Through Ethernet)
- 120 internal Presets
- World's flattest 12" bass with only 30 cm height
- 1 x 6 m Schuko/powerCON TRUE1-TOP cable
The Paveosub-112sp DDA is a very compact self-powered bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12" sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 4 kW 3-channel amplifier module makes the Paveosub-112sp DDA ideal for building powerful satellite systems.
The design of the flat box renders the subwoofer tilt resistant and makes for ideal use together with satellite tops on speaker rod cranks. In an upright-standing position, the Paveosub-112sp DDA forms an elegant silhouette with column loudspeakers or Line-Array-Sticks.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping. There are two integrated M20 flange nuts for mounting the Paveosub-112sp DDA in a flat-lying or upright-standing position, ensuring flexible use and an attractive look depending on the combination of top units.
The Paveosub’s stacking notches have the same footprint as the Modular-10 lying in the monitor position. Additionally, both loudspeakers have the same 52 cm measurements and optically form one unit. This arrangement constitutes a professional drum fill and is also very space saving on stage.
The extremely powerful motor (B / L factor 26) of the high-quality 12" neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large 4" voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
The two bass reflex ports are mounted on either side. This arrangement prevents a tumbling of the additional double-suspended membrane at high x-max as the air can escape on all sides and a uniform counter pressure is produced.
The box walls have also been braced with this kind of tunnel arrangement. Other internal bracings ensure maximum stability and prevent unwanted resonance.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling.
The active electronics are convection cooled by a large heatsink and are maintenance free. No dust or moisture can be sucked or drawn in, making the Paveosub-112sp DDA ideal for permanent installations. The robust cooling fins are amply rounded and have no sharp edges.
The control unit, DSP unit, signal connections and the Speakon OUT terminal are protected against moisture with a weather-proof, transparent cover. The cooling system is waterproof and the powerCON TRUE1 connectors are equipped with a rubber sealing cap.
Control
The woofer is in 8 Ω. The 12"chassis of the Paveosub-112sp DDA is powered by one channel (1.580 W/8 Ω) of the internal power amplifier module. 2 x 800 W/4 Ω are available for satellite or monitors.
A Paveosub-112sp DDA can power a second Paveosub-112 and power up to 4 additional speakers.
Technical Data
Drivers
1 x 12" Neodym long excursion woofer with 4" voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 28,8 kg
Amplifier
3rd Generation Class D
Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω
Power output CH2 & CH3
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω
Amplifier gain
LF: 32 db, HF: 26 db
Signal-to-noise ratio
>120 db (20 - 20.000 Hz, 8 Ω)
Damping factor
>1.000 (8 Ω, 1 kHz)
Distortion
THD+N < 0,05 % (20 - 20.000 Hz, 8 Ω)
Protection
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over voltage protection
DC protection of outputs
Input limiter, peak limiter
Temperature monitoring of the heatsink and transistors
Voltage
Intelligent and regulated switching power supply with automatic voltage detection
Switching between 120/230 V 50/60 Hz, worldwide use
Voltage range: from 85 - 268 V
Prozessor
64 bit, 96 kHz sample rate
Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-Amplifiers in one network
Dynamic range input
120 db
Input level Nominal / Maximal
+ 6 dBu / + 23 db
Latency
0 - max. 0,5 ms
Routing
2 input mixers allow flexible routing to each output
EQ Filter
20 parametric EQ filters per path
each filter can be set as Bell, Shelving, Notch, or Allpass Filter
X-Over
Butterworth, Bessel, Linkwitz-Riley
Limiter
Per input and output
Delay
0 up to 800 ms (max. 275 m delay) in each input for the user
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers
Phase
Infinitely adjustable from 0° - 180°
Operable language
English, German, France, Spain
Software interfaces
Software update via Ethernet
Realtime monitoring for PC and MAC
Impedance measurement -monitoring of the connected drivers per output stage channel
Temperaturmessung der EndstufensektionTemperature measurement of the power amplifier section
Gruppenbildung zum gleichzeitigen Einstellen aller zusammengefassten LautsprechertypenGroup building for simultaneous setting of all combined speaker types
Dimmung und Abschaltung des DisplaysDimming and switching off the display
Standby-Schaltung des EndstufenmodulsStandby circuit of the power amplifier module
Passwortschutz mit Abstufung: Werkseinstellung / User-Ebene / KomplettschutzPassword protection with gradation: Factory setting / user level / complete protection
Accessoires
Carrying bag big for 2 x speaker stand/ rod
Item no. 999920000
Carrying bag big, for 2 x speaker stands/speaker rods or Rolldolly outrigger, 1.200 x 190 x 290 mm.
Distance rod with crank type 213/40
Item no. 999921340
M20 Crank speaker rod type 213/40 with Ring-Lock function for clearance-free mounting in the speaker flange, high 920 - 1.520 mm, max. 35 kg load.
Telescopic rod type 213/68
Item no. 999921368
M20 Telescopic speaker rod type 213/68 extra high with Ring-Lock function for clearance-free mounting in the speaker flange, high 1.100 - 1.800 mm, max. 35 kg load.
Telescopic rod type 213/37
Item no. 999921337-9010
M20 Telescopic speaker rod type 213/37 (white), high 905 - 1.450 mm, max. 35 kg load.
Telescopic rod type 246/26 black
Item no. 999924626-9005
M20 Telescopic speaker rod type 246/26 super high (black), high 1.400 - 2.400 mm, max. 30 kg load.
Telescopic rod type 246/26 white
Item no. 999924626-9010
M20 Telescopic speaker rod type 246/26 super high (white), high 1.400 - 2.400 mm, max. 30 kg load.
Carrying bag long
Item no. 999924609
Carrying long, für 2 x telescopic speaker rod type 246/26, 120 x 19 x 29 cm, 1.420 x 200 x 140 mm.
Adapter with Ring-Lock function
Item no. 999921441
Stand adapter with Ring-Lock function, e.g. for speaker stand type 213 or distance rod type 246/26. The ring-lock function ensures a clearance-free fit in the speaker's high stand flange.
M20 Adapter 250 mm
Item no. 999921329
The 250 mm long adapter is perfectly suited as a M20 single rod or as an extension rod.
Speaker rod short type 214/47
Item no. 999921447
M20 M20 speaker rod short type 214/47 with Ring-Lock function, height 250 mm, max. 35 kg load, e.g. for tops in vertically high ground stacks on subwoofers.
Cable Clip for speaker stand/ rod
Item no. 999935000
The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.
speakON cable 0.5/1/3/6/10/15/20/30 m
Item no. 80440XXX1
Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.
speakON adapter
Item no. 999654669
Adapter to connect two speaker cables.
XLR signal cable 0,5/3/6/10/15/20/30/50 m
Item no. 80205XXX5
XLR signal cable in different lengths, SC Primus 2 x 0,5 mm² made of 28 x 0,15 Ø copper strands, 100 % shielding due to dense copper spiral turner and metallised fleece, Neutrik NC3MXX-B/NC3FXX-B plugs, gold-plated contacts, black plug housing.
powerCON TRUE1-TOP 3/6/10/15/20/30/50 m
Item no. 80325XXX3
Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W-TOP and NAC3MX-W-TOP device connectors.
powerCON TRUE1-TOP-Schuko 3/6/10/15/20/30/50 m
Item no. 80325XXX2
Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W-TOP and Schuko device connectors.