Info
- 1 x 15" compact self powered bass reflex subwoofer
- 3-channel 4 kW ampmodul: 1 x 2.400 W + 2 x 800 W at 4 Ω
- Horizontally and vertically stackable
- Bi-amping function
- Manual control via display, push-button and encoder
- Software control via Dante (Digital Audio Network Through Ethernet)
- 120 internal Presets
- World's flattest 15" bass with only 36 cm height
- 1 x 6 m Schuko/powerCON TRUE1-TOP cable
The Paveosub-115sp DDA is a very compact self-powered bass reflex subwoofer with 3-channel 4 kW power amplifier module and DSP speaker management system.
With its low profile of only 36 cm and a width and depth of only 54 x 57 cm, the bass is ideal for fixed installations where a discreet appearance is required and the loudspeakers need to be integrated into the architecture as unobtrusively as possible.
In mobile use, the Paveosub-115sp DDA saves a lot of space and weight with a transport volume of only 110 litres. The two large handles can take hold from all sides and are located at the centre of gravity.
A removable and stackable front wheel board is available as an accessory for easy handling of the subwoofer. The optional transport protective cover also can be used as weather protection at outdoor events.
The Paveosub-115sp DDA is equipped with a newly developed neodymium transducer with 4" voice coil that can handle 1.200 W AES. The magnet system has three demodulation rings for particularly low distortion. Massive cooling fins ensure low power compression at maximum performance. Together with a high linear excursion and a low moving mass, the subwoofer offers deep, powerful and at the same time very precise bass reproduction.
Internal bracing ensures maximum stability and prevents unwanted cabinet resonances.
The subwoofer can be used flat or upright. On two sides there are stacking moulds, rubber feet and M20 flanges for flexible use with an attractive appearance, depending on the combined satellite loudspeakers. Standing upright, the Paveosub forms a very slim silhouette.
The stacking moulds on the top of the sub are in the same foodprint as the CXN-16 stage monitor.
In addition, both loudspeakers have a width of 54 cm and thus form an elegant optical unit and are a professional set for drum or DJ monitoring, for example. A self-powered Paveosub-115sp DDA can power a CXN-16 bi-amping in half-powered mode.
The active electronics are convection cooled by a large heatsink and are maintenance free. No dust or moisture can be sucked or drawn in, making the Paveosub-115sp DDA ideal for permanent installations. The robust cooling fins are amply rounded and have no sharp edges.
The control unit, DSP unit, signal connections and the Speakon OUT terminal are protected against moisture with a weather-proof, transparent cover. The cooling system is waterproof and the powerCON TRUE1 connectors are equipped with a rubber sealing cap.
Control
The woofer is in 8 Ω. The 15"chassis of the Paveosub-115sp DDA is powered by one channel (1.580 W/8 Ω) of the internal power amplifier module. 2 x 800 W/4 Ω are available for satellite or monitors.
A Paveosub-115sp DDA can power a second Paveosub-115 and power up to 4 additional speakers.
Technical Data
Drivers
1 x 15" Neodym long excursion woofer with 4" voice coil
Lower cut-off frequency
34 Hz (- 10 dB)
45 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.200 W / 2.400 W / 4.800 W
Sensitivity 1 W/1 m
98 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
129 dB SPL / 132 dB SPL / 135 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
360 (H) x 540 (W) x 570 mm (D) / 30,4 kg
Amplifier
3rd Generation Class D
Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω
Power output CH2 & CH3
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω
Amplifier gain
LF: 32 db, HF: 26 db
Signal-to-noise ratio
>120 db (20 - 20.000 Hz, 8 Ω)
Damping factor
>1.000 (8 Ω, 1 kHz)
Distortion
THD+N < 0,05 % (20 - 20.000 Hz, 8 Ω)
Protection
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over voltage protection
DC protection of outputs
Input limiter, peak limiter
Temperature monitoring of the heatsink and transistors
Voltage
Intelligent and regulated switching power supply with automatic voltage detection
Switching between 120/230 V 50/60 Hz, worldwide use
Voltage range: from 85 - 268 V
Prozessor
64 bit, 96 kHz sample rate
Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-Amplifiers in one network
Dynamic range input
120 db
Input level Nominal / Maximal
+ 6 dBu / + 23 db
Latency
0 - max. 0,5 ms
Routing
2 input mixers allow flexible routing to each output
EQ Filter
20 parametric EQ filters per path
each filter can be set as Bell, Shelving, Notch, or Allpass Filter
X-Over
Butterworth, Bessel, Linkwitz-Riley
Limiter
Per input and output
Delay
0 up to 800 ms (max. 275 m delay) in each input for the user
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers
Phase
Infinitely adjustable from 0° - 180°
Operable language
English, German, France, Spain
Software interfaces
Software update via Ethernet
Realtime monitoring for PC and MAC
Impedance measurement -monitoring of the connected drivers per output stage channel
Temperaturmessung der EndstufensektionTemperature measurement of the power amplifier section
Gruppenbildung zum gleichzeitigen Einstellen aller zusammengefassten LautsprechertypenGroup building for simultaneous setting of all combined speaker types
Dimmung und Abschaltung des DisplaysDimming and switching off the display
Standby-Schaltung des EndstufenmodulsStandby circuit of the power amplifier module
Passwortschutz mit Abstufung: Werkseinstellung / User-Ebene / KomplettschutzPassword protection with gradation: Factory setting / user level / complete protection
Accessoires
Detachable wheelboard Paveosub-115
Item no. 505114000
Detachable wheelboard to mount on Paveosub-115/115sp, 15 mm wood with polyurea coating, stackable, 2 butterfly locks, 2 handles, 4 black wheels, engraved logo.
DANTE-Interface 4CH
Item no. 319700043
DANTE Interface 4CH, 4 x analog inputs, 1 x 4CH DANTE output on Ethercon RJ45. Can be used to convert 4 analog signal inputs into DANTE and feed them via one CAT cable into the DANTE capable self-powered subs or HDSP amplifiers. This saves the user wiring and allows all 4 signal inputs of the DSP to be used. Power can be supplied via PoE or optional 12V standard power supply.
Flying plate Paveosub-115/-118/-121
Item no. 409993011-9005
Set of 2 flying plates and screwes for Paveosub-115/-118/-121. Mounted with M10 screws at the side thread points with integrated steel brackets of the subwoofer cabinet (from model year 2022). The upper row of holes allows the subwoofer to be rigged with clamps to a 29cm or 40cm truss, to be suspended with ring eyelets or to be mounted directly in ceilings with heavy-duty dowels.
Flight connectors Paveosub-115
Item no. 409993031-9005
Set of 4 connectors and screws for suspending the Paveosub-115 subs among each other. The load suspension is steel-in-steel with M10 screws.
Rolldolly Paveosub-115 vertical
Item no. 501158300
Rolldolly Paveosub-115 vertical, for up to 4 x stacked subs, 4 x 100 x 36 mm black wheels with brakes. Optional plug-in outriggers can be inserted in the corners and adjusted in depth and height, e.g. to stabilize a ground stacked PA and to level it on uneven ground. Also ideal as a stage trolley for quickly repositioning of EDM/drum monitoring with a Paveosub-115 and CXN-12/16 on top.
Rolldolly outrigger
Item no. 509994050
Rolldolly outrigger, insertion depth and height can be leveled, incl. Quick-Lock-Pin (must be fixed to the dolly).
Castor heavy-duty
Item no. 504558000
Transport castor heavy-duty for converting Rolldolly. Braked 160 mm swivel castor with ball bearing mounted aluminum rim and 50 mm wide wheel tread. Easier to push on grass. Load capacity 300 kg, incl. screws.
Carrying bag big for 2 x speaker stand/ rod
Item no. 999920000
Carrying bag big, for 2 x speaker stands/speaker rods or Rolldolly outrigger, 1.200 x 190 x 290 mm.
Distance rod with crank type 213/40
Item no. 999921340
M20 Crank speaker rod type 213/40 with Ring-Lock function for clearance-free mounting in the speaker flange, high 920 - 1.520 mm, max. 35 kg load.
Telescopic rod type 213/68
Item no. 999921368
M20 Telescopic speaker rod type 213/68 extra high with Ring-Lock function for clearance-free mounting in the speaker flange, high 1.100 - 1.800 mm, max. 35 kg load.
Telescopic rod type 213/37
Item no. 999921337-9010
M20 Telescopic speaker rod type 213/37 (white), high 905 - 1.450 mm, max. 35 kg load.
Telescopic rod type 246/26 black
Item no. 999924626-9005
M20 Telescopic speaker rod type 246/26 super high (black), high 1.400 - 2.400 mm, max. 30 kg load.
Telescopic rod type 246/26 white
Item no. 999924626-9010
M20 Telescopic speaker rod type 246/26 super high (white), high 1.400 - 2.400 mm, max. 30 kg load.
Carrying bag long
Item no. 999924609
Carrying long, für 2 x telescopic speaker rod type 246/26, 120 x 19 x 29 cm, 1.420 x 200 x 140 mm.
Adapter with Ring-Lock function
Item no. 999921441
Stand adapter with Ring-Lock function, e.g. for speaker stand type 213 or distance rod type 246/26. The ring-lock function ensures a clearance-free fit in the speaker's high stand flange.
M20 Adapter 250 mm
Item no. 999921329
The 250 mm long adapter is perfectly suited as a M20 single rod or as an extension rod.
Speaker rod short type 214/47
Item no. 999921447
M20 M20 speaker rod short type 214/47 with Ring-Lock function, height 250 mm, max. 35 kg load, e.g. for tops in vertically high ground stacks on subwoofers.
Cable Clip for speaker stand/ rod
Item no. 999935000
The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.
speakON cable 0.5/1/3/6/10/15/20/30 m
Item no. 80440XXX1
Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.
speakON adapter
Item no. 999654669
Adapter to connect two speaker cables.
XLR signal cable 0,5/3/6/10/15/20/30/50 m
Item no. 80205XXX5
XLR signal cable in different lengths, SC Primus 2 x 0,5 mm² made of 28 x 0,15 Ø copper strands, 100 % shielding due to dense copper spiral turner and metallised fleece, Neutrik NC3MXX-B/NC3FXX-B plugs, gold-plated contacts, black plug housing.
powerCON TRUE1-TOP 3/6/10/15/20/30/50 m
Item no. 80325XXX3
Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W-TOP and NAC3MX-W-TOP device connectors.
powerCON TRUE1-TOP-Schuko 3/6/10/15/20/30/50 m
Item no. 80325XXX2
Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W-TOP and Schuko device connectors.